Software and USB controller for CNC Routers
Features and specifications:
• USB (V2.x) from PC/Laptop running Windows XP, Vista, Windows 7, 8 or 8.1 (32 bit or 64bit)
• motor driver connector pin-out is compatible with 10 pin open source interface
• controller works with most step/dir stepper and servo motor drivers available on the market
• buffered IO for maximum performance
• advanced interpolation algorithms
• start, stop, pause and resume execution of program on your machine
• standard RS274/NGC G-code (EMC2 and LinuxCNC compatible)
• advanced G-codes - G40, G41, G42 (Cutter Radius Compensation) supported
• advanced G-codes - G43, G49 (Tool Length Offsets) supported
• advanced G-codes - G54, G59.3 (Coordinate System Origins) supported
• tested with SolidCAM, MasterCAM, ArtCAM, Vectric, CamBam, MeshCAM ... generated G-code
• Profili 4-axes and 3-axes G-code supported
• import toolpath from DXF files
• import toolpath from PLT/HPGL files
• import toolpath from image files
• import toolpath from NC-Drill (Excellon) files
• import toolpath from Gerber (RS-274X) files
• toolpath simulation
• automatic homing procedure
• advanced toolchange procedures
• automatic tool length measuring
• export toolpath to G-code
• export toolpath to DXF
• SDK (software developers kit) is available
• works on MacOS with virtual machine emulating Windows
Mk3 - 9 axes USB CNC controller
• 9 axes controller for stepper and servo motors
• USB and Ethernet connection
• 110 kHz maximum step frequency
• 25 us pulse width, 50% duty cycle at higher frequencies
• 8 digital outputs on board
• 3 PWM capable outputs with selectable frequency (10Hz to 500kHz)
• 3 outputs with support for RC servo motors
• additional outputs with add on boards (currently up to 32)
• jogging keyboard support with speed potentiometer, shift, step and spindle sync feature
• 8 limit switches with shift feature
• 8 digital inputs on board, filtered and protected
• additional inputs with add on boards (currently up to 32)
• 4 analog inputs
• MPG pendant support
• spindle encoder and index signal support for spindle synchronization
• SD card support for running g-code without computer
• control external devices with I2C and UART protocol
• homing procedure
• tool change procedure
• tool length sensor support
• sensor for capturing and measuring
• digitizing probe support
• H-bot kinematics support
• transformation matrix
• soft limits
• slave axes
• backlash compensation
• integrated web server for monitoring state and sending commands
• API
